Hicarer Quartz Pendulum Trigger Clock Movement Chime Westminster Melody Mechanism Clock Kit with 3 Pairs of Hands

Quartz pendulum trigger clock movement chime Westminster melody mechanism clock kit with 3 pairs of hands Features: Dimension: Total shaft length is 17 mm/ 0.67 inches, thread length is 9.7 mm/ 0.38 inches. Jump second movement, suitable for 2-6 mm/ 0.08-0.24 inches thickness clock panel. Application: You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock and more projects. Specifications: Material: plastic and aluminum Case size: approx. 55 x 55 x 16 mm/ 2.2 x 2.2 x 0.63 inches Power: 1.5V AA 1 x battery (not included) Package includes: 1 x Pendulum clock movement 1 x Trigger clock movement 1 x Chime music box 1 x Second cap 2 x Minute hand 3 x Hour hand 1 x Plastic washer 1 x Brass nut 1 x Brass washer Warm notice: There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.

• What you get: in our pendulum clock movement set, you will receive 3 pairs of hands, pendulum, trigger clock movement, chime music box, mounting hardware and instructions, meet your different needs and replacement
• Pendulum clock movement size: total shaft length is 17 mm/ 0.67 inch, the thread length is 9.7 mm/ 0.38 inches; Jump second movement, which is suitable for 2-6 mm/ 0.08-0.24 inches thickness clock panel
• Hole center to the tip hand size: the hour hands measure approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inch and 82 mm/ 3.2 inch, the minute hands measure approx. 101 mm/ 3.98 inch, 92 mm/ 3.6 inch and 117 mm/ 4.6 inch, and 2 second hand are approx. 100 mm/ 3.9 inch, 1 second cap is approx. 7 mm/ 0.28 inch
• Melody effect: the chiming pendulum movement plays the Westminster melody on the hour, automatically silences the chimes after 9 o'clock pm until 6 o'clock am
• Practical tools for you: these pendulum trigger clock movement replacement parts are practical for you to design and make your own pendulum clock, help you to replace and change a different look; Please notice that the hands are made of aluminum, don't install them with too much pressure or they will be bent